Description: SIM Card Data Cannot be Processed 03-399-00 Unable to establish communications with the SIM Card. Status code 22-560 is raised with this fault code.
Remedy: Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions Perform GP 9 to reload system software. The error persists. Y↓N→Perform SCP 6 Final Actions Install new components as necessary: • SD Card • IP Board
Description: FAX Not Detected 03-401-00 Basic FAX not detected/confirmed. Status code 03-547 is raised with this fault code. 03-403-00 Extended FAX not detected/confirmed. Status code 03-548 is raised with this fault code.
Remedy: Check FAX Board connections. The error persists. Y↓N→Perform SCP 6 Final Actions Cycle system power. The error persists. Y↓N→Perform SCP 6 Final Actions Perform GP 9 to reload system software. The error persists. Y↓N→Perform SCP 6 Final Actions Install new components as necessary: • FAX Board • IP Board
Description: Incompatible FAX Software Detected 03-417-00 FAX software version supplied at power up is not compatible with the CCM. Status code 03-546 is raised with this fault code.
Remedy: Perform GP 9 to reload system software. The error persists. Y↓N→Perform SCP 6 Final Actions Install new components as necessary: • FAX Board • IP Board
Remedy: Check AC Inlet connections. The error persists. Y↓N→Perform SCP 6 Final Actions Install new components as necessary: • AC Inlet Harness • IP Board
Description: DADF Pick-up Jam 05-110-00 DADF pick-up jam. DADF registration sensor does not detect the media leading edge in the specified time from feed start.
Remedy: Open the DADF Top Cover and clean the area surrounding the DADF Pick-up Assembly. The error persists. Y↓N→Perform SCP 6 Final Actions. Clean or replace the DADF Pick-up Assembly . The error persists. Y↓N→Perform SCP 6 Final Actions. Install new components as necessary: • DADF Pick-up Assembly • DADF Assembly • IIT Control Board
Description: DADF Jam During Rotation of Document 05-112-00 DADF jam during rotation of document. DADF registration sensor does not detect the media leading edge in the specified time from feed start.
Remedy: Open the DADF Top Cover and clean the area surrounding the DADF Pick-up Assembly. The error persists. Y↓N→Perform SCP 6 Final Actions. Clean or replace the DADF Pick-up Assembly . The error persists. Y↓N→Perform SCP 6 Final Actions. Install new components as necessary: • DADF Pick-up Assembly • DADF Assembly • IIT Control Board
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.