Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet Z6100 — Trang 6/12

Code: 44:10

Description: Problem with the Aerosol Fan.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Aerosol Fan cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Aerosol Fan . • If the System Error continues, replace the Interconnect PCA .

Code: 44:11

Description: Aerosol Fan not connected.
Remedy: • Check that the Aerosol Fan cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Aerosol Fan .

Code: 46:03

Description: Primer servo shutdown.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Primer Assembly . • Replace the PrintMech PCA . • Replace the Interconnect PCA .

Code: 46:10

Description: Electrical fault in primer motor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Primer Assembly . • Replace the PrintMech PCA . • Replace the Interconnect PCA 

Code: 46:13

Description: Primer test distance failed.
Remedy: • Check that the Primer Arm is not damaged and there are no obstacles in its way. • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Clean the Encoder Strip  • Replace the Primer Assembly .

Code: 50.1:10

Description: Error with the media advance Sensor component or with the cable between sensor and controller.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Check that the OMAS Module cable is not damaged and is correctly connected to the OMAS Controller PCA. • Replace the OMAS Controller Card  • Replace the OMAS Module .

Code: 50.2:10

Description: Error with the media advance sensor controller board.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Check that the CAN cable and the Encoder Cable are correctly connected to the OMAS PCA and the Main PCA (refer to • Check the connection between the OMAS PCA and the Sausalito PCA (the Sausalito is the card connected just behind the OMAS PCA). • Check that the OMAS Module cable is not damaged and is correctly connected to the OMAS Controller PCA. • Replace the OMAS Controller Card 

Code: 50:01

Description: OMAS Navigation failure.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Clean the OMAS window (CREF to procedure in Chap 9) • Replace the OMAS Module .
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie