Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi HP DesignJet Z6100 — Trang 10/12

Code: 73:03

Description: Carriage encoder reading error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Perform the gScan-Axish Diagnostic () to further troubleshoot the error code. • If the System Error continues, perform the gMedia Driveh Diagnostic () to further troubleshoot the error code.

Code: 74:01

Description: Error uploading firmware update file.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Resend the firmware update file to the Printer.

Code: 74:04

Description: Old vacuum fan, upgrade the firmware.
Remedy: • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 76:03

Description: Disk out of space.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Resend the file to the Printer. • If the System Error continues, it is recommended that you remove any unnecessary files from the Hard Disk Drive using the Web Server.

Code: 77:04

Description: Embedded Web Server internal software error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 78.1:04

Description: Media Settings area missing in media settings file.
Remedy: • Resend the file.

Code: 79:03

Description: Generic Firmware error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.

Code: 79:04

Description: Generic Firmware error.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Try to reprint the image using different selections in the driver • Disable Nesting and the Queue. • For more detailed information on troubleshooting the 79:04 system error
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie