Code :

Code: 50:03
Description: FW error in DSP or Engine code or link is broken between PCAs.
Remedy: • There is a tendancy for this system error to being displayed because of cables becoming disconnected. Check all relavant cables are correctly connected, especially the cables from the OMAS Controller and the Main PCA and the Sausalito PCA. • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the correct type of Main PCA is installed, Designjet Z6100 NOT Designjet 4x00. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Replace the OMAS Controller Card • Replace the OMAS Module

Code: 50:11
Description: Navigation problems, may be due to a mis-positioned sensor, DOF or skew issue.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Check that the OMAS Module cable is not damaged and is correctly connected to the OMAS Controller PCA. • Replace the OMAS Controller Card • Replace the OMAS Module

Code: 50:14
Description: FW version mismatch between the controller fw and the version of the file in the Engine disk.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Replace the OMAS Controller Card

Code: 50:17
Description: Advisory fw error in DSP or Engine code of the media advance sensor component.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Check that the OMAS Module cable is not damaged and is correctly connected to the OMAS Controller PCA. • Replace the OMAS Controller Card • Replace the OMAS Module .

Code: 51.1:10
Description: Error detected with the sensor on the Service Station Door.
Remedy: • Check that the Maintenance Cartridge Door Sensor cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Maintenance Cartridge Door Sensor.

Code: 51:10
Description: Error detected with the sensor on the Window.
Remedy: • Check that the Window Sensor cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Window Sensor.

Code: 52:01
Description: Drop Detector fiber detected.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Replace the Drop Detector .

Code: 52:10
Description: Drop Detector switch On/Off failure.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Drop Detector cable is not damaged and is correctly connected to the Service Station cable. • Check that the Service Station cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Drop Detector . • Replace the Sausalito PCI PCA . • If the System Error continues, replace the Interconnect PCA .