Description: Tray 2 ~ 6 is Empty The No Paper Sensor indicates the Tray is empty or nearly empty. • 74-530-00 Tray 4 is Empty • 74-532-00 Tray 4 paper not available. • 74-535-00 Tray 4 is nearly empty
Causes: • No Paper Actuator, PL3.2.10 • No Paper Sensor, PL3.2.11 • No Paper Sensor Harness, PL3.2.12 • Feeder Assy, PL3.2.1, PL12.4.29 • Feeder Board, PL12.3.4 • Registration Sensor Harness, PL3.3.23 • Lower Option Harness, PL12.3.11 • MCU Board, PL10.2.18
Remedy: 1 Check the No Paper Sensor Actuator for obstructions or damage. The actuator is undamaged. Go to Step 2. Replace the Actuator. 2 Test the No Paper Sensor for the affected Tray using dc330: • Tray 2 (72-105) • Tray 3 (73-002) • Tray 4 (74-008) • Tray 5 (75-008) • Tray 6 (76-011) The sensor signal changes (On/Off). Replace the MCU Board. Go to Step 3. 3 Check for 3.3V at P/J10-10 on the MCU Board or P/J353-6 on the Feeder Board. Is 3.3 V available at P/J10-10 or P/J353-6? Replace the No Paper Sensor. Go to Step 4. 4 Replace the MCU Board or Feeder Board. The error persists. Visually inspect and test continuity of all applicable harnesses. Complete.
Code: 74-539-00
Description: Tray 2 ~ 6 is Open The Size Switch indicates the Tray is open. • 74-539-00 Tray 4 is Open
Remedy: 1 Check the Tray guides and Size Switch actuators. The Tray is undamaged. Go to Step 2. Replace the Tray. 2 Test the Size Switch for the indicated Tray using dc741. The signal changes (On/Off) when the Tray is removed. Go to Step 4. Go to Step 3. 3 Check continuity of the LPP/MOT Harness between P/J18 on the MCU Board and P/J219 at the switch. For optional trays, check the Lower Option Harness P/J353 and P/J365. The harness is undamaged. Replace the Size Switch. Replace the harness. 4 Replace the Feeder/Registration Assembly for Tray 2 faults, or the Optional Feeder for Trays 3~6. The error persists. Replace the MCU Board. Complete.
Code: 75-103-00
Description: Tray 2 ~ 6 is Open The Size Switch indicates the Tray is open. • 75-103-00 Paper Size Jam from Tray 5
Remedy: 1 Check the Tray guides and Size Switch actuators. The Tray is undamaged. Go to Step 2. Replace the Tray. 2 Test the Size Switch for the indicated Tray using dc741. The signal changes (On/Off) when the Tray is removed. Go to Step 4. Go to Step 3. 3 Check continuity of the LPP/MOT Harness between P/J18 on the MCU Board and P/J219 at the switch. For optional trays, check the Lower Option Harness P/J353 and P/J365. The harness is undamaged. Replace the Size Switch. Replace the harness. 4 Replace the Feeder/Registration Assembly for Tray 2 faults, or the Optional Feeder for Trays 3~6. The error persists. Replace the MCU Board. Complete.
Code: 75-530-00, 75-532-00, 75-535-00
Description: Tray 2 ~ 6 is Empty The No Paper Sensor indicates the Tray is empty or nearly empty. • 75-530-00 Tray 5 is Empty • 75-532-00 Tray 5 paper not available. • 75-535-00 Tray 5 is nearly empty
Causes: • No Paper Actuator, PL3.2.10 • No Paper Sensor, PL3.2.11 • No Paper Sensor Harness, PL3.2.12 • Feeder Assy, PL3.2.1, PL12.4.29 • Feeder Board, PL12.3.4 • Registration Sensor Harness, PL3.3.23 • Lower Option Harness, PL12.3.11 • MCU Board, PL10.2.18
Remedy: 1 Check the No Paper Sensor Actuator for obstructions or damage. The actuator is undamaged. Go to Step 2. Replace the Actuator. 2 Test the No Paper Sensor for the affected Tray using dc330: • Tray 2 (72-105) • Tray 3 (73-002) • Tray 4 (74-008) • Tray 5 (75-008) • Tray 6 (76-011) The sensor signal changes (On/Off). Replace the MCU Board. Go to Step 3. 3 Check for 3.3V at P/J10-10 on the MCU Board or P/J353-6 on the Feeder Board. Is 3.3 V available at P/J10-10 or P/J353-6? Replace the No Paper Sensor. Go to Step 4. 4 Replace the MCU Board or Feeder Board. The error persists. Visually inspect and test continuity of all applicable harnesses. Complete.
Code: 75-539-00
Description: Tray 2 ~ 6 is Open The Size Switch indicates the Tray is open. • 75-539-00 Tray 5 is Open
Remedy: 1 Check the Tray guides and Size Switch actuators. The Tray is undamaged. Go to Step 2. Replace the Tray. 2 Test the Size Switch for the indicated Tray using dc741. The signal changes (On/Off) when the Tray is removed. Go to Step 4. Go to Step 3. 3 Check continuity of the LPP/MOT Harness between P/J18 on the MCU Board and P/J219 at the switch. For optional trays, check the Lower Option Harness P/J353 and P/J365. The harness is undamaged. Replace the Size Switch. Replace the harness. 4 Replace the Feeder/Registration Assembly for Tray 2 faults, or the Optional Feeder for Trays 3~6. The error persists. Replace the MCU Board. Complete.
Code: 76-103-00
Description: Tray 2 ~ 6 is Open The Size Switch indicates the Tray is open. • 76-103-00 Paper Size Jam from Tray 6
Remedy: 1 Check the Tray guides and Size Switch actuators. The Tray is undamaged. Go to Step 2. Replace the Tray. 2 Test the Size Switch for the indicated Tray using dc741. The signal changes (On/Off) when the Tray is removed. Go to Step 4. Go to Step 3. 3 Check continuity of the LPP/MOT Harness between P/J18 on the MCU Board and P/J219 at the switch. For optional trays, check the Lower Option Harness P/J353 and P/J365. The harness is undamaged. Replace the Size Switch. Replace the harness. 4 Replace the Feeder/Registration Assembly for Tray 2 faults, or the Optional Feeder for Trays 3~6. The error persists. Replace the MCU Board. Complete.
Code: 76-530-00, 76-532-00, 76-535-00
Description: Tray 2 ~ 6 is Empty The No Paper Sensor indicates the Tray is empty or nearly empty. • 76-530-00 Tray 6 is Empty • 76-532-00 Tray 6 paper not available. • 76-535-00 Tray 6 is nearly empty
Causes: • No Paper Actuator, PL3.2.10 • No Paper Sensor, PL3.2.11 • No Paper Sensor Harness, PL3.2.12 • Feeder Assy, PL3.2.1, PL12.4.29 • Feeder Board, PL12.3.4 • Registration Sensor Harness, PL3.3.23 • Lower Option Harness, PL12.3.11 • MCU Board, PL10.2.18
Remedy: 1 Check the No Paper Sensor Actuator for obstructions or damage. The actuator is undamaged. Go to Step 2. Replace the Actuator. 2 Test the No Paper Sensor for the affected Tray using dc330: • Tray 2 (72-105) • Tray 3 (73-002) • Tray 4 (74-008) • Tray 5 (75-008) • Tray 6 (76-011) The sensor signal changes (On/Off). Replace the MCU Board. Go to Step 3. 3 Check for 3.3V at P/J10-10 on the MCU Board or P/J353-6 on the Feeder Board. Is 3.3 V available at P/J10-10 or P/J353-6? Replace the No Paper Sensor. Go to Step 4. 4 Replace the MCU Board or Feeder Board. The error persists. Visually inspect and test continuity of all applicable harnesses. Complete.
Code: 76-539-00
Description: Tray 2 ~ 6 is Open The Size Switch indicates the Tray is open. • 76-539-00 Tray 6 is Open
Remedy: 1 Check the Tray guides and Size Switch actuators. The Tray is undamaged. Go to Step 2. Replace the Tray. 2 Test the Size Switch for the indicated Tray using dc741. The signal changes (On/Off) when the Tray is removed. Go to Step 4. Go to Step 3. 3 Check continuity of the LPP/MOT Harness between P/J18 on the MCU Board and P/J219 at the switch. For optional trays, check the Lower Option Harness P/J353 and P/J365. The harness is undamaged. Replace the Size Switch. Replace the harness. 4 Replace the Feeder/Registration Assembly for Tray 2 faults, or the Optional Feeder for Trays 3~6. The error persists. Replace the MCU Board. Complete.
Máy Photocopy
Máy in mã vạch - In tem nhãn
PC- Laptop - Điện thoại
Máy in – Mực in
Máy chiếu - Màn chiếu
Máy chấm công - Kiểm soát ra vào
Máy hủy tài liệu
Máy đếm tiền, kho , quỹ
Loa - Loa bluetooth, vi tính, Karaok
Máy lạnh, Cây nước nóng lạnh
