Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Xerox Phaser 6700 — Trang 3/16

Code: 09-623-00 ... 09-623-04

Description: CMYK Toner is Low or Empty The Toner CRUM indicates the Toner Cartridge is low or empty. • 09-623-00 Cyan Toner is Empty • 09-623-01 Cyan Toner is Empty • 09-623-02 Cyan Toner is Empty • 09-623-03 Cyan Toner is Empty • 09-623-04 Cyan Toner is Empty
Causes: • Toner Cartridge (Y), PL6.1.1 • Toner Cartridge (M), PL6.1.2 • Toner Cartridge (C), PL6.1.3 • Toner Cartridge (K), PL6.1.4 • CRUM Connector Assy, PL6.1.10 • MCU Board, PL10.2.18 • Toner CRUM Harness, PL11.1.1
Remedy: • Replace the affected Toner Cartridge. • Cycle system power. • If the problem persists, follow the procedure below.
1 Reseat the indicated Toner Cartridge. The error persists. Go to Step 2. Complete. 2 Check connections between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/J206(C), P/J207 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check Toner CRUM Harness continuity between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/ J206(C), P/J207 (K). The harness is undamaged. Go to Step 4. Replace the Toner CRUM Harness. 4 Check for 2.5V at P/J11-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Toner CRUM? Replace the affected Toner Cartridge. Replace the MCU Board.

Code: 09-624-00 ... 09-624-04

Description: CMYK Toner is Low or Empty The Toner CRUM indicates the Toner Cartridge is low or empty. • 09-624-00 Magenta Toner is Empty • 09-624-01 Magenta Toner is Empty • 09-624-02 Magenta Toner is Empty • 09-624-03 Magenta Toner is Empty • 09-624-04 Magenta Toner is Empty • 09-625-00 Yellow Toner is Empty
Causes: • Toner Cartridge (Y), PL6.1.1 • Toner Cartridge (M), PL6.1.2 • Toner Cartridge (C), PL6.1.3 • Toner Cartridge (K), PL6.1.4 • CRUM Connector Assy, PL6.1.10 • MCU Board, PL10.2.18 • Toner CRUM Harness, PL11.1.1
Remedy: • Replace the affected Toner Cartridge. • Cycle system power. • If the problem persists, follow the procedure below.
1 Reseat the indicated Toner Cartridge. The error persists. Go to Step 2. Complete. 2 Check connections between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/J206(C), P/J207 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check Toner CRUM Harness continuity between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/ J206(C), P/J207 (K). The harness is undamaged. Go to Step 4. Replace the Toner CRUM Harness. 4 Check for 2.5V at P/J11-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Toner CRUM? Replace the affected Toner Cartridge. Replace the MCU Board.

Code: 09-625-01 ... 09-625-04

Description: CMYK Toner is Low or Empty The Toner CRUM indicates the Toner Cartridge is low or empty. • 09-625-01 Yellow Toner is Empty • 09-625-02 Yellow Toner is Empty • 09-625-03 Yellow Toner is Empty • 09-625-04 Yellow Toner is Empty
Causes: • Toner Cartridge (Y), PL6.1.1 • Toner Cartridge (M), PL6.1.2 • Toner Cartridge (C), PL6.1.3 • Toner Cartridge (K), PL6.1.4 • CRUM Connector Assy, PL6.1.10 • MCU Board, PL10.2.18 • Toner CRUM Harness, PL11.1.1
Remedy: • Replace the affected Toner Cartridge. • Cycle system power. • If the problem persists, follow the procedure below.
1 Reseat the indicated Toner Cartridge. The error persists. Go to Step 2. Complete. 2 Check connections between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/J206(C), P/J207 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check Toner CRUM Harness continuity between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/ J206(C), P/J207 (K). The harness is undamaged. Go to Step 4. Replace the Toner CRUM Harness. 4 Check for 2.5V at P/J11-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Toner CRUM? Replace the affected Toner Cartridge. Replace the MCU Board.

Code: 09-626-00 ... 09-626-04

Description: CMYK Toner is Low or Empty The Toner CRUM indicates the Toner Cartridge is low or empty. • 09-626-00 Black Toner is Empty • 09-626-01 Black Toner is Empty • 09-626-02 Black Toner is Empty • 09-626-03 Black Toner is Empty • 09-626-04 Black Toner is Empty
Causes: • Toner Cartridge (Y), PL6.1.1 • Toner Cartridge (M), PL6.1.2 • Toner Cartridge (C), PL6.1.3 • Toner Cartridge (K), PL6.1.4 • CRUM Connector Assy, PL6.1.10 • MCU Board, PL10.2.18 • Toner CRUM Harness, PL11.1.1
Remedy: • Replace the affected Toner Cartridge. • Cycle system power. • If the problem persists, follow the procedure below.
1 Reseat the indicated Toner Cartridge. The error persists. Go to Step 2. Complete. 2 Check connections between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/J206(C), P/J207 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check Toner CRUM Harness continuity between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/ J206(C), P/J207 (K). The harness is undamaged. Go to Step 4. Replace the Toner CRUM Harness. 4 Check for 2.5V at P/J11-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Toner CRUM? Replace the affected Toner Cartridge. Replace the MCU Board.

Code: 09-627-00 ... 09-630-00

Description: CMYK Imaging Unit is Near/Past End of Life or Missing The Imaging Unit CRUM indicates the Imaging Unit is near, past end of life, or missing. • 09-627-00 Cyan Imaging Unit is Past End of Life • 09-628-00 Magenta Imaging Unit is Past End of Life • 09-629-00 Yellow Imaging Unit is Past End of Life • 09-630-00 Black Imaging Unit is Past End of Life
Causes: • Yellow Imaging Unit, PL5.1.8 • Magenta Imaging Unit, PL5.1.9 • Cyan Imaging Unit, PL5.1.10 • Black Imaging Unit, PL5.1.11 • Imaging Unit CRUM, PL5.2.4 • MCU Board, PL10.2.18 • CRUM / Disp Harness, PL11.2.4
Remedy: • Replace the affected Imaging Unit. • Cycle system power. • If the problem persists, follow the procedure below.
1 Reseat the indicated Imaging Unit. The error persists. Go to Step 2. Complete. 2 Check connections between P/J12 on the MCU Board and indicated CRUM Connector: P/J208(Y), P/J209 (M), P/J210(C), P/J211 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check CRUM/Disp Harness continuity between P/J12 on the MCU Board and indicated CRUM Connector: P/J208(Y), P/J209 (M), P/ J210(C), P/J211(K). The harness is undamaged. Go to Step 4. Replace the CRUM/ Dispense Harness. 4 Check for 2.5V at P/J12-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Imaging Unit CRUM? Replace the affected Imaging Unit. Replace the MCU Board.

Code: 09-634-00 ... 09-634-04

Description: CMYK Toner is Low or Empty The Toner CRUM indicates the Toner Cartridge is low or empty. • 09-634-00 Cyan Toner Missing • 09-634-01 Cyan Toner Missing • 09-634-02 Cyan Toner Missing • 09-634-03 Cyan Toner Missing • 09-634-04 Cyan Toner Missing
Causes: • Toner Cartridge (Y), PL6.1.1 • Toner Cartridge (M), PL6.1.2 • Toner Cartridge (C), PL6.1.3 • Toner Cartridge (K), PL6.1.4 • CRUM Connector Assy, PL6.1.10 • MCU Board, PL10.2.18 • Toner CRUM Harness, PL11.1.1
Remedy: • Replace the affected Toner Cartridge. • Cycle system power. • If the problem persists, follow the procedure below.
1 Reseat the indicated Toner Cartridge. The error persists. Go to Step 2. Complete. 2 Check connections between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/J206(C), P/J207 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check Toner CRUM Harness continuity between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/ J206(C), P/J207 (K). The harness is undamaged. Go to Step 4. Replace the Toner CRUM Harness. 4 Check for 2.5V at P/J11-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Toner CRUM? Replace the affected Toner Cartridge. Replace the MCU Board.

Code: 09-635-00 ... 09-635-04

Description: CMYK Toner is Low or Empty The Toner CRUM indicates the Toner Cartridge is low or empty. • 09-635-00 Magenta Toner Missing • 09-635-01 Magenta Toner Missing • 09-635-02 Magenta Toner Missing • 09-635-03 Magenta Toner Missing • 09-635-04 Magenta Toner Missing
Causes: • Toner Cartridge (Y), PL6.1.1 • Toner Cartridge (M), PL6.1.2 • Toner Cartridge (C), PL6.1.3 • Toner Cartridge (K), PL6.1.4 • CRUM Connector Assy, PL6.1.10 • MCU Board, PL10.2.18 • Toner CRUM Harness, PL11.1.1
Remedy: • Replace the affected Toner Cartridge. • Cycle system power. • If the problem persists, follow the procedure below.
1 Reseat the indicated Toner Cartridge. The error persists. Go to Step 2. Complete. 2 Check connections between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/J206(C), P/J207 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check Toner CRUM Harness continuity between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/ J206(C), P/J207 (K). The harness is undamaged. Go to Step 4. Replace the Toner CRUM Harness. 4 Check for 2.5V at P/J11-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Toner CRUM? Replace the affected Toner Cartridge. Replace the MCU Board.

Code: 09-636-00 ... 09-636-04

Description: CMYK Toner is Low or Empty The Toner CRUM indicates the Toner Cartridge is low or empty. • 09-636-00 Yellow Toner Missing • 09-636-01 Yellow Toner Missing • 09-636-02 Yellow Toner Missing • 09-636-03 Yellow Toner Missing • 09-636-04 Yellow Toner Missing
Causes: • Toner Cartridge (Y), PL6.1.1 • Toner Cartridge (M), PL6.1.2 • Toner Cartridge (C), PL6.1.3 • Toner Cartridge (K), PL6.1.4 • CRUM Connector Assy, PL6.1.10 • MCU Board, PL10.2.18 • Toner CRUM Harness, PL11.1.1
Remedy: • Replace the affected Toner Cartridge. • Cycle system power. • If the problem persists, follow the procedure below.
1 Reseat the indicated Toner Cartridge. The error persists. Go to Step 2. Complete. 2 Check connections between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/J206(C), P/J207 (K). The connection is secure. Go to Step 3. Secure the connection. 3 Check Toner CRUM Harness continuity between P/J11 on the MCU Board and indicated CRUM Connector: P/J204(Y), P/J205 (M), P/ J206(C), P/J207 (K). The harness is undamaged. Go to Step 4. Replace the Toner CRUM Harness. 4 Check for 2.5V at P/J11-3(Y), -7(M), - 11(C), -15(K) on the MCU Board. Is 2.5V available to the indicated Toner CRUM? Replace the affected Toner Cartridge. Replace the MCU Board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie